Product Description
Tamarack Solar
Side of Pole
Solar Panel Mounts
Tamarack Solar Side of Pole Mounts support pole diameters of 2" to 4" and modules with center-center distribution of 19" to 39". Tilt range includes 15 - 65 degrees. Tamarack's Side of Pole Mounts are manufactured using heavy-duty corrosion-resistant 5052-H32 aluminum and are available in models to support one, two or three solar panels. Schedule 40 pipe not included.
Specifications
- 5052-H32 aluminum construction
- Stainless steel fasteners
- Withstands 50 psf (90 mph wind loads)
- High-tensile strength
- Corrosion-resistant
- Attractive brushed aluminum finish
- Precision hole positioning and alignment
- Easy, rapid assembly
- Well-illustrated instructions
- Strong - Constructed from 5052-H32 aluminum with stainless steel fasteners, your modules are protected from damage in virtually all weather conditions, including extremes of wind, rain, ice, and snow. Using licensed engineers and destructive testing methods, these structures have been designed and proven to withstand 50 psf (90 mph wind loads) - significantly higher than industry standards.
- Durable - Using punch/form construction methods, rather than extrusions, allows for the use of high tensile strength, and corrosion resistant materials. The structures will last the life of the PV modules they support, and beyond.
- Versatile - The structures are universal, designed to hold modules from the major manufacturers. Different models are available to mount from one to twenty modules. All modules are infinitely adjustable over a wide range for precise positioning of the modules. Season adjustments can be done easily by one person.
- Easily Assembled - Using CNC (Computer Numerically Controlled) manufacturing methods assures precise hole location and alignment of each component. Conveniently packaged and labeled sub-assemblies, along with well-illustrated instructions make assembly rapid and straightforward.
 |  |  |
| Single Module Mount | Two Module Mount | Three Module Mount |
| Model | UNI-SP/01A | UNI-SP/01XH | UNI-SP/02 | UNI-SP/02A* | UNI-SP/02X* | UNI-SP/03 | UNI-SP/03W** |
| Module Width | 1 Panel Up to 27.5" | 1 Panel Up to 27.5" | 2 Panels Combined Width Up to 45" | 2 Panels Combined Width Up to 55" | 2 Panels Combined Width Up to 55" | 3 Panels Combined Width Up to 70" | 1 60 Cell or 72 Cell Panel in Portrait |
| Pole Diameter | 2 - 4.5" | 2 - 4.5" | 2 - 4.5" | 3 - 4.5" | 3 - 4.5" | 4 - 4.5" | |
* The only difference between the "A" version and the "X" version is that the X version has a longer bucket - meaning it will hold longer panels. The bucket on the X version is 35.6" and on the A version is 25.5". If the distance between the mounting holes of the module is closer to 35.6", use the X. If it's closer to 25.5", use the A.
** The "W" version has a wider bucket which will accommodate a center-to-center mounting hole distance of 29.2" to 39".
