Product Description
QPC 3000W 24VDC All-In-One Solar Inverter/Charger Controller with Built-In MPPT
All-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.
The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time.
Through a state-of-the-art control algorithm, the AC-DC charging module realizes fully digital voltage and current double closed loop control, with high control precision in a small volume. Wide AC voltage input range and complete input/output protections are designed for stable and reliable battery charging and protection.
Based on full-digital intelligent design, the DC-AC inverter module employs advanced SPWM technology and outputs pure sine wave to convert DC into AC. It is ideal for AC loads such as household appliances, power tools, industrial equipment, and electronic audio and video equipment. The product comes with a segment LCD display design which allows real-time display of the operating data and status of the system. Comprehensive electronic protections keep the entire system safer and more stable.
Features:
- Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
- Two output modes: mains bypass and inverter output; uninterrupted power supply.
- Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
Advanced MPPT technology with an efficiency of 99.9%. - Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
ON/OFF rocker switch for AC output control. - Power saving mode available to reduce no-load loss.
- Intelligent variable speed fan to efficiently dissipate heat and extend system life.
- Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
- 360 ° all-round protection with a number of protection functions.
- Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
Efficiency:
Advanced MPPT with up to 99.9% efficiency
Multiple charge and discharge modes are available
Safety:
360 degrees of security from hardware to software
With IEC, SAA, CETL, FCC certification
All-in-One:
Support for many types of batteries
Supports Li-ion battery BMS communication
Reliable:
Outputs high-quality pure sine wave AC power
Reliable output for long periods at rated power
User-Friendly:
Industrial design with a modern aesthetic look
Easy to install and simple to use
Intelligent:
Exclusive Li-ion battery BMS dual activation
Support for remote monitoring of operating parameters
INVERTER OUTPUT
Rated Output Power: 3,000W
Max Peak Power: 6,000VA
Rated Output Voltage: 120Vac
Rated AC Frequency: 50Hz/60Hz
Waveform: Pure Sine Wave
Switch Time: 10ms (typical)
BATTERY
Battery Type: Li-ion/Lead-Acid/User Defined
Rated Battery Voltage: 24Vdc
Voltage Range: 20~33Vdc
Max MPPT Charging Current: 60A
Max Mains/Generator Charging Current: 40A
Max Hybrid Charging Current: 100A
PV INPUT
Number of MPPT Trackers: 1
Max PV Array Power: 1,600W
Max Input Current: 40A
Max Voltage of Open Circuit: 100Vdc
MPPT Voltage Range: 30~85Vdc
MAINS/GENERATOR INPUT
Input Voltage Range: 90~140Vac
Frequency Range: 50Hz/60Hz
Bypass Overload Current: 40A
EFFICIENCY
MPPT Tracking Efficiency 99.9%
Max. Battery Inverter Efficiency 92%
GENERAL
Dimensions: 1.2 x 0.9 x 0.3f）
Weight: 14.9lb
Protection Degree: IP20, Indor OnIy
Operating Temperature Range: -15℃~55℃（5℉~55℉）
Noise : <60dB
Cooling Method: InternaI Fan
Warranty: 2 years
COMMUNICATION
Embedded Interfaces: RS485/CAN/USB/Dry contact
External Modules: (Optional） Wi-Fi/GPRS
Made In China
