Name: IntegraRack IR-T1 No Penetration TileBallast™ Roof Mount (10 Pack) R-T1TB1031
Brand: IntegraRack
SKU: R-T1TB1031
Price: 126.5 USD
Availability: InStock

Overview
Product Videos
Reviews

Product Description

IntegraRack IR-T1 No Penetration TileBallast™ Roof Mount (10 Pack)

Engineered for 100% non-invasive tile roof installations. Roof brackets can be installed in less than 2 minutes and they do not require tile removal or any roof penetrations. Each mount has an integrated upright for mounting with all solar module rail systems.

No Penetration
No Tile Removal
4x Faster Install Times
For Use With All Rail Systems
Tested for 175lbs of Uplift
Integrated Flex Point Prevents Bolt Tension From Cracking Tiles

The IR-T1 is the first of its kind and the only tile roof hook that requires no removal of tiles and no roof penetration at all. The IR-T1 TileBallast™ System is 4x faster to install than traditional tile roof hooks and much stronger, since our proprietary installation system actually increases the overall strength of the entire roof structure. When installed using our test proven IntegraGel Epoxy, each bracket uses the weight of the heavy concrete tiles which are nested and overlapping each other. With this system, each bracket is capable of withstanding over 175lbs of uplift and transforms standard roof tiles into a larger foot ballast system for the solar module rails to attach directly to. One tube of IntegraGel Epoxy is good for up to ten mounts, and comes FREE with every IR-T1 Ten Pack.

Each IR-T1 comes with a strong, integrated upright mount that can be attached to any rail system. The simplicity of this system allows for extremely fast and easy installations. With no need to remove and replace tiles on the roof, installers are much less fatigued on large jobs. Many installers see increased sales with home-owners that are worried about potential leaks and love the benefits of a non-invasive system.

*Works with most all styles of concrete roof tiles with at least 1.25 inch thickness and 11.75-15.5 inch spacing. Only recommended for use with concrete roof tiles.

This product conforms to UL 2703 Mechanical and Bonding requirements.

Step 1: Measure and Mark

Step 2: Apply Recommended Adhesive

Step 3: Slide IR-T1 Tabs Under Upper & Lower Row Of Tiles

Step 4: Attach INCLUDED IR-L1 Bracket

Step 5: Place Next Row

Step 6: Mount Rail to L-Foot Bracket

STEP 7: INSTALL MODULES ONTO RAILS

*Some media may show older versions of the IR-T1. Please refer to the image at the top of this page

COMPATIBLE WITH THESE RAIL SYSTEMS:

FEATURES

No Tile Removal and No Roof Penetration

The IR-T1 TileBallast™ Bracket is the first tile roof hook that is 100% non-invasive, and its no penetration design along with our patent pending concrete adhesive installation method actually increases the strength of the entire roofing system. No roof warranty issues to deal with, and a huge selling point for homeowners to go solar without worrying about a leaking roof after the solar installation is complete.

For Use With All Rail Systems

The integrated upright allows for the mounting of any rail system like any standard tile hook. The two piece design of this upright creates a very solid support for any solar system, but offers just enough flexibility to withstand up to 150 mph wind speeds.

Lightning Fast Install

With its 100% non-invasive design, installation times are 4x faster than traditional tile roof hooks. The IR-T1 is by far the fastest and strongest tile roof hook available today.

High-Strength Tested

The IR-T1 utilizes a super high-strength tested concrete adhesive system to bond three roof tiles together along with the IR-T1's two integrated mounting hooks bonded as one piece. This unique system creates a large heavy ballasted foot out of the three concrete roof tiles, and these bonded roof tiles are also held down and nested in place by five additional overlapping tiles.