Product Description
IntegraRack IR-D2 Wide Foot TPO Roof Mount IR-D2MS4162
- No Penetration
- Installed In Less Than 1 Minute
- Compatible With Rails
- Multiple Mounting Methods
- Tested for 200lbs of Uplift
- Works On Most All TPO Type Roof Surfaces
Our Super Sealing Wide Foot TPO Mounted Bracket is the fastest and easiest solution on the market and can be installed in less than 1 minute! The IR-D2 can mounted using nothing but a fast setting polyurethane sealant to hold it down for up to 200 pounds of uplift per bracket, but it can also be bolted to the roof for added strength. Works with most all rail-based systems.
This product conforms to UL 2703 Mechanical and Bonding requirements.
Step 1: Clean Mounting Surfaces
Step 2: Measure and Mark
Step 3: Use spreader to apply adhesive
Step 4: Firmly press bracket into place
For more in depth instructions, see the video provided.
Compatible with these rail systems:
FEATURES
Lightning Fast Installation
The IR-D2 Wide Foot TPO Roof Mount is the fastest and easiest solution on the market and can be installed in less than 1 minute!
No Penetration
This bracket can be mounted using nothing but a fast setting polyurethane sealant to hold it down for up to 200 pounds of uplift per bracket, but it can also be bolted to the roof for added strength. The IR-D2 allows for flat, low profile mounting of solar modules on TPO roofs, and incorporates micro-inverter/solar optimizer mounting points on each bracket.
Compatible With All Rail Based Systems
The IR-D2 is compatible with all rail based solar mounting systems. The bracket is designed with an opening for a 5/16" T-Bolt and above that is an adjustable slot for a 3/8" T-Bolt, so that any rail system can be mounted to the bracket.
Quick Fold Bend Tabs
The Bend Tab Clamps incorporated into the top of our brackets are designed to be used with our revolutionary rail-less module clamping system, but they can also be used with most all rail based systems as well. When quickly folded over with a flathead screwdriver, it clamps the solar module frame directly to the IR-F1 Rail-Less Module Flange Clamp Bonding Bracket, bonding it and locking the solar module firmly in place. For mid-row brackets, you can bend each tab in a different direction, and for end modules the tabs can both be bent the same direction for added clamping tension.
