Product Description
M-1® Universal Adhesive/Sealant BLACK (1 - 10.1 oz Tube)
M-1 adheres to a wide range of construction materials including PVC, EPDM, most metals, wood, glass, masonry concrete, fiberglass and solvent-sensitive foams so it is works in almost any situation requiring a sealant. Yet it delivers nearly 400 psi shear strength and remains elastic after cure—up to 525% elongation, so it also performs as a structural adhesive.
- Commercial Roofing: Repair of flashing and coping joints, sealing reglet joints and termination bars, night seals around penetrations, bonding walkway treads and just about any type of emergency roof repairs.
- Residential Roofing: Chimney and step flashing, skylights, roofing details, cove joints. Penetrations: Sealing pipe, cable, conduit penetrations through walls and roofs. Walls, windows, doors: Masonry and curtain wall construction.
- Lightning protection: Bonding grounding cables Solar: Mounting solar panels, assembling components, waterproofing power distribution
- Masonry and concrete: Crack repairs, horizontal and vertical expansion joints, bonding metal brackets
- Mechanical: Sealing ducts, insulation, flanges and piping Sealing termination bars
M-1 Advantages
- Non-shrinking
- No solvents – non-toxic – no odor – no risk to human health
- Applies down to 32°F/0°C
- Continuous service at 200° F/93°C
- Effective on damp surfaces
- Skins over in 30 minutes
- Paintable
- Non-slump, applies vertically and overhead
- Good color stability, UV stable
- Gun grade, no special tools or mixing required
Application Performance Standards:
- • ASTM C920, Type S, Grade NS, Class 35
Uses NT, T1, M, G, A & O
• ASTM E84, Class A
• Federal Specification TT-S-00230-C Type II, Class B
• Corps of Engineers CRD-C-541, Type II, Class B
• Canadian Standards Board CAN 19, 13-M82
Regulatory Compliance
- Conforms to OTC Rule for Sealants and Caulks
- Meets requirements of California Regs: CARB, BAAQMD and SCAQMD
- This product does not contain cancer causing chemicals listed in California Proposition 65
- Conforms to USDA Requirements for Non-food Contact
Green Standards:
- LEED 2.2 for New Construction and Major Renovations: Low Emitting Materials (Section 4.1) 1 Point
- NAHB Model Green Home Building Guidelines: 5 Global Impact Points
- VOC Content: less than 19 grams/liter ASTM D2369 EPA Method 24 (tested at 240°F/115°C)
